· Support IEEE802.3af
, IEEE802.3at, Single port output max 25W
· RJ-45 port support
Auto MDI/MDI-X
· Embedded 4-port PoE,
1-port uplink
· 10/100Mbps duplex,
half-duplex
· Back-plane
(Switching Fabric): 1.0Gbps
· 1K MAC Address Table
· Network transmission
distance extend to 150M, total 300M ( only PoE04
Switch)
· LCD display and
control panel, display the total power, power of
each port, the working temperature, etc. (only
PoE08)
· The entire device or any single port reset (only PoE08)
· Extensive status indication. ALARM: general alarm indicator, if any
failure of equipment, ALARM red lights flash;
working status indication for each port, it
turns green when normal, abnormal blinking.
· More effective protection circuit. Output protection on each port,
short circuit, overload protection. When any
power output short circuit or overload, the
protect circuit is active, and the corresponding
alarm indicator light flashes. Meanwhile all
other output port is not affected.
· Total power overload protection. When sum of all port power is over the
total power limit; to ensure that the device
work normally, it will shut off the power port
of high port number. This ensure that the
equipment will not exceed the total power
,otherwise will caused the entire device to stop
working.
· The device support 4-8 port, output 25W max per port.
· Wall Mount Design
· System reliability MTBF>100k hours
SPECIFICATIONS
|
Standards |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX and
100Base-FX Fast Ethernet
IEEE 802.3x Flow Control and Back
Pressure
IEEE 802.3af Power Over Ethernet
IEEE 802.3at Power Over Ethernet |
|
Switch Architecture |
Back-plane(Switching Fabric
):1.0Gbps
Transfer Rate: 14,880pps for
Ethernet port
148,800pps for Fast Ethernet port |
|
transfer Rate |
Ethernet：10Mbps（half-duplex）20Mbps（duplex）
Fast Ethernet：100Mbps（half-duplex）200Mbps（duplex） |
|
Mac Address |
2K MAC address table |
|
Connectors |
10/100TX: 4/8 RJ-45 with auto
MDI/MDI-X function; Support PoE
injector function |
|
protection |
short circuit, overload protection |
|
Network Cable |
10BASE-T：
CAT3，4，5
UTP（max.
length 100m
）
EIA/TIA-568 100ohm STP（max. length 100m）
100BASE-TX：
CAT 5 or up UTP（max. length 100m）
EIA/TIA-568 100ohm STP（max length 100m） |
|
Cable extend |
200M
( only PoE04 Switch ) |
|
PoE pin assignment |
Support alternative A, B mode.
Positive (VCC+)：RJ-45 pin 1，2，4，5
Negative (VCC-)：RJ-45 pin 3，6，7，8
Data (1，2，3，6) |
|
Protocol |
CSMA/CD |
|
Power input |
AC Adapter (100V-240V AC 50HZ-60HZ，DC48V/
2.5A) |
|
Overload current protection |
Present |
|
Operating Temperature |
-20°C－+70°C |
|
Storage Temperature |
-40
～+
70℃
|
|
Dimension |
4 Port PoE Switch：metal
155.6mm
x 71.4mm x 26mm
8 Port PoE Switch：metal，1U
19’
436mm
x 210mm x 44mm |
|
Weight |
4 port PoE switch：380g；8
port PoE switch：3kg |
The data above is only for reference and any
change of them will not be informed in advance.
For more detailed technical inquiries, please
feel free to call the Technical Department of
our company.
