|
The CCTV testerPRO STest-895 is
developed for the On-Site installation and
maintenance of video monitoring system. It can
be used for displaying video, testing video
level, controlling PTZ, scanning PTZ address,
generating images, capturing data of RS485 and
testing LAN cable etc. Its functions, easy
operation, and portability makes it simple for
the CCTV technician to install and maintain CCTV
system, improving work efficiency and get the
labor cost down.
STest-895 equipped with the
Optical Power Meter. Use in testing the laser
power of Video Fiber Optic Transmission
equipment, and testing the Fiber Optic Patch
Cord , etc.
STest-895 is an ideal multifunction Instrument
for CCTV security system, Fiber Optical
communication, CATV and other Fiber Optic works.
Application:
1.CCTV system installation and maintenance
2.Dome camera and All in one
camera testing
3.The CCTV transmitting channel testing
4.PTZ controller
FEATURES
 3.5"TFT-LCD
, 960（H）×240（V）resolution
Optical
power meter, testing the laser power of Video
Fiber Optic Transmission equipment, and testing
the Fiber Optic Patch Cord , etc.
Digital
Multimeter, performs AD/DC Voltage, AC/DC
Current, Resistor, Conductivity, Capacitor and
Diode test.
DC12V
power output
Audio
input
Adjustable
brightness, contrast, color of LCD
Video
Level testing, video signals measured in IRE or
mV
Automatically
identify and adapt the video mode of NTSC and
PAL
Colorbar
Video signal generator, transmit/receive
colorful images
Support
more than twenty kinds of PTZ controller protocols.
For example, PELCO-P, PELCO-D, SAMSUNG etc.
PPTZ
address scanning, search up the ID of PTZ
camera.
Capture
the PTZ protocol to assist the setting personnel
to find out the control protocol and therefore
easily target the problematic equipment.
Support
RS232 and RS485 interface, the rate 150-19200bps
Powerful
in testing LAN cable, measuring the connecting
status and displaying the sequence of connection
PTZ(P/L
& Zoom) Control: Control the status of P/L, zoom
in/out the camera, adjust the aperture, foci and
setting parameters, run and call the preset.
Lithium
Ion Polymer Batteries(3.7V DC3000mAh), more
reliable, and
work 15 hours
Easy
for use that the train is almost unnecessary
SPECIFICATIONS
|
MODEL |
STest-895 CCTV Security Tester |
|
Video Test |
|
Signal mode |
NTSC/PAL (Auto
Adjust) |
|
Display |
3.5 inch TFT-LCD ,960 x 240 resolution |
|
LCD adjust |
Adjustable brightness,
contrast, color of LCD |
|
Video IN/OUT |
1 channel BNC Input & 1 channel Output |
|
Video Output Mode |
1.0 Vp-p |
|
Video Level test
|
|
Level test |
Video signals measured in IRE or mV |
|
Power Output |
|
Power output |
DC12V, 1A |
|
Audio Test |
|
Audio input |
1 channel
Audio input |
|
PTZ controller |
|
Communication |
RS232, RS422 simplex and RS485 |
|
PTZ Protocol |
Compatible with more than
20 protocols such as PELCO-D/P, Samsung,
Panasonic, Lilin, Yaan, etc.customized |
|
Baud Rate |
150,300,600,1200,2400,4800,9600,19200bps |
|
Video
Signal Generation |
|
Color bar generation |
Output 1 channel color bar video signal
for testing monitor |
|
UTP CABLE TEST |
|
UTP cable test |
Test UTP cable connection state and
display in the screen.
Read the number of the test box. |
|
PTZ data Capture and display
|
|
PTZ Data Test |
Capture and
Analyze
the PTZ data sent from controlling
device |
|
PTZ address scanning
|
|
PTZ address scan |
Search up the ID of PTZ camera |
|
Optical Power
Meter |
|
Wavelength |
850, 1300, 1310, 1490, 1550, 1625nm |
|
Detector |
InGaAs |
|
Linker |
FC/PC(SC, ST) |
|
Measurement Range |
-70~+10dBm |
|
Display Resolution |
0.01dB |
|
Digital Multimeter |
|
Reading range |
-6600~+6600 |
|
AC/DC Voltage |
0-600V Auto/Manual ranging, 0.1mV
resolution |
|
AC/DC Current |
6.6mA, 66mA, 660mA, 10A Manual ranging |
|
Resistor |
660, 6.6K, 66K, 660K, 6.6M, 66MΩ
auto/manual range |
|
Continuity |
Built-in buzzer will sound, if
resistance is lower than 50Ω |
|
Diode |
2.0V Range, 1mV resolution |
|
Capacitor |
6600pF~66,000μF
auto/manual range |
|
POWER |
|
Power Adapter |
DC5V, 2A |
|
Battery |
1 pcs Lithium Ion
Polymer Batteries, 3.7V DC3000mAh |
|
Rechargeable |
4.5 hours recharging time, work for 12
hours |
|
Low Consumption |
Sleeping mode, display battery power
state |
|
Other Parameters |
|
Work Temperature |
-10℃---+50℃ |
|
Work Humidity |
30%-90% |
|
Dimension/Weight |
112mmx189mmx47mm /
500g
|
The data above is only for reference and any
change of them will not be informed in advance.
For more detailed technical inquiries, please
feel free to call the Technical Department of
our company.
|
