Nav 
Products
Home > Products > Wire Tracker > CT-66
Multi-functional RJ11 RJ45 CCTV Cable Tester Wire Tracker
Model: CT-66
● Cable tracer, can search UTP cable, BNC cable from mess cable
● Identify cable type:100M/1000M, straight/cross/other.
● UTP/STP/RJ45/RJ11 cable scan and continuity testing
● UTP port support max 60V withstand voltage
● Identify the status in the working telephone line: standby, ringing and off-hook
● PD powered detection: detect whether the power output of the POE switch is normal, and detect the pins used for power supply.
Features
Specifications
Connection diagram
Download
● Secondary code digital mode, decisively rejects noise and false signals, locate cables quickly and easily
● Cable tracer and UTP cable test at the same time.
● Identify cable type:100M/1000M, straight/cross/other
● UTP/STP/RJ45/RJ11 cable scan and continuity testing
● Identify the status in the working telephone line: standby, ringing and off-hook
● Quickly detect the near-end, mid-end and far-end fault point of RJ45 cable connector
● UTP port support max 60V withstand voltage, the wire can be traced directly in connection with PoE switch
● Shielded cable and shielding layer continuity test
● Detect the short circuit of cable NEW
● Detect the link continuity of the switch port NEW
● PD powered detection: detect whether the power output of the POE switch is normal,
and detect the pins used for power supply.
● Support silent mode
● Two bright LED lights for working in the dark
Item | Wire Tracker CT-66 |
Emit signal | Digital signal（rejects noise and false signals ） |
Cable type | RJ45 Twisted pair, RJ11 telephone line, BNC cable etc. |
UTP cable test | The digital “1-8” for cable sequence shielded cable and shielding layer continuity indicator, check cable type indicator: straight/cross/other, 100M/1000M Network cable test, and near-end, mid-end, far-end continuity testing |
Continuity test of RJ45 cable connectors | Check wire continuity of both RJ45 cable connector |
PD (powered) test | PoE switch power supplying status test and check the pins used for power supply. |
LED lamp | Short press ON /OFF LED Light |
Silent mode | Long press key “Mute” to switch silent mode, find cable through indicator |
Audio output | Support external audio output |
Power supply | |
External power supply | Two AA battery |
General | |
Working Temperature | -10℃---+50℃ |
Working Humidity | 30%-90% |
Dimension | |
Emitter Dimension | 152mm x 62mm x 27mm /0.12KG |
Receiver Dimension | 218mm x 48mm x 32mm /0.1KG |
