8 Inch Larger Screen Android System OPM VFL VLS SFP OTDR Tester

Home > Products > Optical Fiber Tester > MOT-85

8 Inch Larger Screen Android System OPM VFL VLS SFP OTDR Tester

Model: MOT-85

● 8 inch IPS touch screen, 1920*1200 resolution

● 4 core CPU, support online update and install applications

● Internal storage and external TF card

● Report saved as EXCEL, PDF, or screenshots format etc

● ONE Gigabit SFP port, support insert SFP optical fiber module, for optical fiber network testing

● Support snap shot screen

● Support remote control

● Gigabit network port, support Ping and scan IP address etc

● RJ45 TDR cable’s short and open test

● Improvement cable tester, UTP cable etc continuity test

● PoE power output and PoE voltage and power measurement

● Stable laser source, optical power meter and visual fault locator

Share it

Features

Specifications

Connection diagram

Download

OTDR:

● 8 inch IPS touch screen, 1920*1200 resolution

● 1310/1550/1610 wavelength optional, 26/28/30/32/34dB Dynamic range optional, max test range 150KM*

● Stable laser source, support CW/270/330/1000/2000Hz

● Test fiber’s length, loss, attenuation parameters and event map, locate connection point/ fusion point

● Automatic analysis of various linkers/fusion points, easy analyze of various events

● Save and view the testing curves, support zoom and move curves, view details

● Support saving curves number ≥30000pcs

● Support create testing report, curve trajectory graphs, parameter settings, fiber event information, and fiber link information

● Report saved as EXCEL, PDF, or screenshots format etc

● Optical Loss test, detect the optical or optical components loss value .It is a key basic function for confirming the optic fiber installation condition and fault status. Light source shares with OTDR ports outputs laser light.

● Visual Fault Locator, it Outputs red light for checking continuity of launch fibers or short patch cord. Breaks and bending in fiber can be identified visually.

● Stable Laser Source, it shares OTDR optical port and work on the same working wavelength of OTDR, the output power can be adjustable for different testing applications.

● Optical power meter with five wavelength 1625nm,1550nm, 1490nm, 1310nm,1300nm, 850nm, linear or nonlinear optical power display, both for optical power testing and Fiber link loss relative measurement

● Digital multimeter, DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement

Cable test:

● Improvement cable tester, UTP cable, telephone cable etc sequence and continuity test, save testing report. Support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug

● Upgraded RJ45 cable TDR test, support cable’s open and short testing, max test 180m

● Cable tracer, search BNC cable, network cable and telephone cable from the mess cables

● Cable length, BNC cable, network cable, telephone cable, RVV cable, elevator cable, and cat 5/6 cable’s length test. Max measurement for cable’s open is 3KM (Short circuit length test not supported)

Other functions:

● ONE Gigabit SFP port, support insert SFP optical fiber module, for optical fiber network testing

● Advanced Network Tool, Scan IP, Route tracking, Socket debugging, ping packet test, DHCP, PPPOE, LLDP

● 7.4V 7800mA Li-ion Battery, 3.5 hours charging, normal working time lasts 11 hours:

OTDR Technical Specifications
Wavelength (nm) Optional *	1310/1550				1610
Only support detects optical signal	Support				N/A
Support Active fiber testing	N/A				Support
Dynamic range(dB)² Optional*	28/26	30/28	32/30	34/34	28	30	32	34
Pulse width (ns)	5,10,20,30,50,80,160,300,500,800,1000,2000,4000,6000,10000,20000
Testing range	≤150 Km
Event blind zone (m)³	≤2m
Attenuation blind zone (m)³	≤10m
Linearity (dB/dB)	±0.05 dB/ dB
Loss threshold (dB)	0.05
Loss resolution ratio (dB)	0.01
Minimum distance resolution	0.05
Sampling point(K)	32-128
Distance uncertainty (m)	±(1 m + 5×10^-5× distance + sampling interval)
Distance scope (km)	0.5,1,2,5,10,25,50,100,200
Typical real-time refreshing duration	1s
File format	SOR standard format/PDF/EXCEL
Measurement duration	5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable
Storage	FLASH (EMMC)8G + TF card
Interface type	FC-PC,SC-PC
Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure, without considering the uncertainty caused by optical fiber refractivity. 2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 200km/20000ns/3min. 3. Measuring conditions of blind zone: reflection event is within 5Km, reflection strength is 45dB. Measured by the minimum pulse width.

Specification
Size & Display	8 inch IPS touch screen ,1920*1200 resolution
Network Port	Dual 1000M LAN port, 10/100/1000M auto adapt
WIFI	Built in 2.4G WIFI, speeds150M, display wireless camera image
ONE Gigabit SFP port	support insert SFP optical fiber module, for optical fiber network testing
Built in Camera * Optional	Built in Camera function Customizable ,support 13MP *
Laser distance meter* Optional	Measurement range100m, accuracy±3mm,Laser class 2,Laser type 635nm,Power output <1mW Customizable *
Digital Multimeter	DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement
UTP cable test	Test UTP cable connection status and display on the screen. Read the number on the screen. detect the near-end, mid-end and far-end fault point of RJ45 cable connector, can test shield cable
RJ45 TDR cable test	Support cable’s open and short testing, max 180m
Digital Cable tracer	Search BNC cable, network cable and telephone cable from the mess cables. Cable tracer and UTP cable test app in the same interface, also can search shield cable
Network test	Trace route, Link monitor, DHCP server, port flashing, Ping test
Electroscope	Voltage range	AC12-1000V
	Frequency	50/60Hz
	Alarm type	Sounds and light double alarms
	Level	CAT.III 1000V / CAT.IV 600V;CE
PoE Voltage test	Measurement POE switch or PSE power supply voltage and cable connection status
Visual fault locator	10mW visual fault locator with 650nm wavelength, emit red laser sources to test multi-mode and single mode fiber’s bending and breakage, test range 8KM
Digital Multi-meter	DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement
Optical power meter	Wavelength:1625,1550nm,1490nm,1310nm,1300nm,850nm, measurement range ,-70 ～ +10 dBm, for optical power testing and Fiber link loss relative measurement
Power
External power supply	DC 12V（2A）
Battery	Built-in 7.4V Li-ion battery, 7800mAh
Rechargeable	After charging 3.5 hours, normal working time 11 hours
Parameter
Operation setting	OSD menu, select your desired language: English, Portuguese, Korean, Russian, Italian, French, Polish, Spanish, Japanese, Turkish, Deutsch, Serbian, Czech, Vietnamese etc
Auto off	5-30 (mins)
Working environment
Working Temperature	-10℃---+50℃
Working Humidity	30%-90%
Dimension/Weight	274mmX171mmX50mm / 1.2Kg

Application:

Multi-function MOT-85 OTDR series is an essential tool for fiber length and network testing. OTDR displays the power of the returned signal related to distance. The information can be used to confirm the transmission quality of a fiber optic link. It is widely used in the maintenance, construction and monitoring of cable line. It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of splice, and failure location, etc. If taking the all in one OTDR, it will make working conditions safer and increasing productivity.

● Fiber length testing and Event Map etc

● PING Test, IP Scan, Port flashing and WIFI

● Network cabling project installation and maintenance